Potential for agricultural production on disturbed soils mined for apatite using legumes and beneficial microbe

Christmas Island has been mined for rock phosphate for over 100 years, and as mining will finish in the next few decades there is a need to develop alternative economies on the island, such as high value crop production. However, to conserve the unique flora and fauna on the island, only land previously mined will be considered for this purpose. As these soils have been severely perturbed by mining, strategies to improve soil quality parameters need to be undertaken before plant based industries can be considered. For instance, legumes and beneficial microbes have demonstrated a positive role in the remediation of degraded soils. Therefore, this study aimed to establish the scientific basis upon which agriculture can effectively be developed on s oils post phosphate mining. Six legume species (Glycine max (Soybean), Vigna radiata (Mungbean), V. unguiculata (Cowpea), Phaseolus vulgaris (Navybean), Cajanus cajan (Pigeon pea), and Lablab purpureus (Lablab)) were sown onto a two ha rehabilitated site t hat had previously been mined for rock phosphate. The soil had a pH of 7.0, and was high in P but low in Bo, Cu, K, Mg, N and S and had low organic C. The legumes were inoculated with their respective rhizobial inoculant or co-inoculated with the rhizobia and a plant growth promoting bacteria (PGPB) at three different fertilizer rates (nil, a low rate, and five times the low rate). With the exception of P. vulgaris, all the legume species survived. The application of fertilizer was essential for maximum biomass yields 18 weeks after sowing, however the lower fertilizer rate was sufficient to obtain maximum yields for some cultivars. The PGPB increased yields and nodulation of some of the legumes at different fertilizer levels. Although the legumes (except P. vulgaris) grew in the Christmas Island environment, selection of appropriate legume cultivars and inoculants plus optimization of the fertilizer regime is required for reliable agricultural productivity on the island.

Investigating the distribution of acacia longifolia ssp. sophorae in south-west Victoria using satellite remote sensing and GIS

Mapping and analysis of the distribution of environmental weeds is an important component of strategic weed management. Such information is particularly important in managing 'native invaders', where invasion characteristics must be clearly understood prior to any management action being taken. This paper reports on an investigation of the current distribution of the native invader Acacia longifolia ssp. sophorae (Labill.) Court (coast wattle) in south-west Victoria, using remote sensing and Geographic Information Systems (GIS). Coast wattle was successfully mapped from Landsat ETM imagery using a supervised classification procedure, with 82%, of coast wattle shown on the map accurately depicting coast wattle on the ground. An estimated 11,448 ha were classified as supporting coast wattle, representing 12% of native vegetation in the study area. A more detailed GIS analysis in the Lower Glenelg National Park revealed coast wattle has invaded a limited number of vegetation types, and is more prevalent close to roads and within management zones associated with disturbance. The current regional extent of the species means widespread control is unlikely; hence the immediate focus should be on preventing further spread into areas where it is currently absent. Landsat imagery also proved to be a successful tool for mapping large scale coast wattle distribution, and could be used in long-term monitoring of the species.

Effect of storage on the biochemical and processing quality of Adzuki Bean (Vigna angularis)

Storage of adzuki beans and other pulse grains causes biochemical and physical changes that affect the hydration properties of the beans. This affects the quality of products made from the beans such as the Japanese bean paste “ann.” Storage, particularly under unfavourable conditions, leads to the “hard shell” phenomenon, where beans fail to imbibe water when soaked and remain hard, and the “hard-to-cook” phenomenon where the seeds hydrate normally, but the cotyledon fails to hydrate and soften during cooking. The hard shell phenomenon is attributable to impermeability of the seed coat to water, which is due to biochemical changes in the seed coat, such as the formation of protein-tannin complexes, and biophysical changes such as reduction in size or closure of the straphiole aperture in the hilum area—the main area for water entry into the adzuki bean. The hard-to-cook phenomenon is due to changes in the cotyledon tissue, which include formation of insoluble pectinates, lignification of the cell wall and middle lamella, interaction of condensed tannins with proteins and starch, and changes to the structure and functionality of the cellular proteins and starch.

Conservation of genetic diversity in British populations of the diploid endemic Coincya monensis ssp monensis (Isle of Man Cabbage): the risk of hybridisation with the tetraploid alien, Coincya monensis ssp cheiranthos

Coincya monensis is represented in the British flora by two, cytologically distinct subspecies. Coincya monensis ssp monensis is an endemic diploid with a coastal sand dune distribution that includes a number of isolated populations. Coincya monensis ssp cheiranthos is a tetraploid alien, well established in South Wales in early successional habitats. Both subspecies share similar life form traits, flowering times and pollinators. Cluster analysis and phylogenetic reconstruction based on sequences of the mitochondrial nad4 gene confirmed the distinction between alien and endemic taxa. Tetraploid populations carry more polymorphic RAPDs loci and their genetic diversity is partitioned more within than among populations. In contrast, C. monensis ssp monensis has a distinct population genetic structure. Analysis of the multilocus genetic data confirmed a structure of genetically isolated, endemic population clusters in Scotland, Arran, the Isle of Man and South Wales. Experimental hybridisation showed the two subspecies are interfertile. Multivariate analysis of RAPDs data resolved hybrids between alien and endemic clusters and hybrids contained a proportion of alien-specific polymorphic loci. Hybrids of alien maternal parentage contained the mitochondrial nad4 sequence characteristic of the alien subspecies. Since the alien subspecies can invade mobile sand dune communities from urban sites and compete for pollinators, there is a risk that alien and endemic populations will mix and introgress. Conservation of endemic genetic diversity in Britain will require protection for all C. monensis ssp monensis populations. Currently, the most disjunct endemic population in South Wales is most at risk from introgression.

Sphingobacterium pakistanensis sp. nov., a novel plant growth promoting rhizobacteria isolated from rhizosphere of Vigna mungo

The taxonomic status of a bacterium, strain NCCP-246(T), isolated from rhizosphere of Vigna mungo, was determined using a polyphasic taxonomic approach. The strain NCCP-246(T) can grow at 16-37 °C (optimum 32 °C), at pH ranges of 6-8 (optimum growth occurs at pH 7) and in 0-4 % (w/v) NaCl. Phylogenetic analysis based upon on 16S rRNA gene sequence comparison revealed that strain NCCP-246(T) belonged to genus Sphingobacterium. Strain NCCP-246(T) showed highest similarity to the type strain of Sphingobacterium canadense CR11(T) (97.67 %) and less than 97 % with other species of the genus. The DNA-DNA relatedness value of strain NCCP-246(T) with S. canadense CR11(T) and Sphingobacterium thalpophilum JCM 21153(T) was 55 and 44.4 %, respectively. The chemotaxonomic data revealed the major menaquinone as MK-7 and dominant cellular fatty acids were summed feature 3 [C16:1 ω7c/C16:1 ω6c] (37.07 %), iso-C15:0 (28.03 %), C16:0 (11.85 %), C17:0 cyclo (8.84 %) and C14:0 (2.42 %). The G+C content of the strain was 39.2 mol%. On the basis of DNA-DNA hybridization, phylogenetic analyses, physiological and, biochemical data, strain NCCP-246(T) can be differentiated from the validly named members of genus Sphingobacterium and thus represents as a new species, for which the name, Sphingobacterium pakistanensis sp. nov. is proposed with the type strain NCCP-246(T) (= JCM18974 (T) = KCTC 23914(T)).

Molecular identification and characterization of phosphate solubilizing pseudomonas sp. isolated from rhizosphere of mash bean (Vigna mungo L.) for growth promotion in wheat

Bio-inoculants have potential role in plant growth promotion. The present study evaluated the potential of Pseudomonas strains as bio-inoculants in wheat on the basis of plant growth promotion and physiological characterization. The 16S rRNA gene sequencing and phylogenetic analysis revealed that four isolated strains belonged to genus Pseudomonas. These strains were positive for phosphorus solubilization and indole acetic acid production, whereas only two strains were positive candidate for their nitrogen fixing ability as determined by presence or absence of nifH gene through amplification from polymerase chain reaction. The pot experiment showed that the integrated use of Pseudomonas strains as co-inoculant and 50% applied mineral fertilizers enhanced the maximum wheat growth and development from 58 to 140% for different shoot and root growth parameters. The strain NCCP-45 and NCCP-237 were closely related to Pseudomonas beteli and Pseudomonas lini, respectively. These isolated strains can be used to increase crop productivity by using as a bio-fertilizer inoculum.

Comparison of the strain distribution obtained from multi scale and conventional approaches to modelling extrusion

An investigation of the application of a multi scale CAFE model to prediction of the strain localization phenomena in industrial processes, such as extrusion, is presented in this work. Extrusion involves the formation of a strong strain localization zone, which influences the final product microstructure and may lead to a coarse grain layer close to the surface. Modelling of the shape of this zone and prediction of the strain magnitude will allow computer aided design of the extrusion process and optimisation of the technological parameters with respect to the microstructure and properties of the products. Thus, the particular objective of this work is comparison of the FE and CAFE predictions of strain localization in the shear zone area in extrusion. Advantages and disadvantages of the developed CAFE model are also discussed on the basis of the simulation results.

Morphological and biochemical alterations of abalone testicular germ cells and spawned sperm and their fertilizing ability

In this study, we aimed to detect morphological and biochemical changes in developing germ cells (Gc), testicular sperm (Tsp), and spawned sperm (Ssp) using capacitation-associated characteristics. Gradual changes in the profiles of two membrane proteins, namely NaCl- and detergent-extractable proteins, were observed as compared Gc with Tsp and Tsp with Ssp. These membrane modifications were accomplished mostly through the introduction of new protein sets, both peripheral and integral, into Tsp and Ssp membranes. Activation of serine proteases, particularly in Ssp detergent-extracted proteins with the molecular masses of 38–130 kDa was evident and marked a major difference between Ssp and Tsp. An increase in the level of tyrosine phosphorylation of the proteins ranging from 15 to 20 kDa was noted in Tsp and remained constant in Ssp. Specifically, these three capacitation-associated characteristics could be detected in Ssp, possessing full fertilizing capacity. The lack of an activated proteolytic activity in Tsp resulted in a delayed fertilization, but not affected fertilizing ability. We believe that these characteristics should be advantageous in predicting abalone sperm fertilizing capability, particularly in cases when isolated germ cells or purified Tsp are used in place of spawned sperm in abalone aquaculture.

Distributive justice and the Nash bargaining solution

Suppes-Sen dominance or SS-proofness (SSP) is a commonly accepted criterion of impartiality in distributive justice. Mariotti (Review of Economic Studies, 66, 733–741, 1999) characterized the Nash bargaining solution using Nash’s (Econometrica, 18, 155–162, 1950) scale invariance (SI) axiom and SSP. In this article, we introduce equity dominance (E-dominance). Using the intersection of SS-dominance and E-dominance requirements, we obtain a weaker version of SSP (WSSP). In addition, we consider α − SSP, where α measures the degree of minimum acceptable inequity aversion; α − SSP is weaker than weak Pareto optimality (WPO) when α = 1. We then show that it is still possible to characterize the Nash solution using WSSP and SI only or using α -SSP, SI, and individual rationality (IR) only for any a Î [0,1)[01). Using the union of SS-dominance and E-dominance requirements, we obtain a stronger version of SSP (SSSP). It turns out that there is no bargaining solution that satisfies SSSP and SI, but the Egalitarian solution turns out to be the unique solution satisfying SSSP.

Understanding of the bainite transformation in a nano-structured bainitic steel

A 0.79C-1.5Si-1.98Mn-0.98Cr-0.24Mo-1.06Al-1.58Co (wt%) steel was isothermally heat treated at 200°C for 10 days to form a nano-scale bainitic microstructure consisting of nanobainitic ferrite laths with high dislocation density and retained austenite films. The crystallographic analysis using TEM and EBSD revealed that the bainitic ferrite laths are close to the Nishiyama-Wassermann orientation relationship with the parent austenite. There was only one type of packet identified in a given transformed austenite grain. Each packet consisted of two different blocks having variants with the same habit plane, but different crystallographic orientations. The presence of fine C-rich clusters and Fe-C carbides with a wide range of compositions in bainitic ferrite was revealed by Three-dimensional Atom Probe Tomography (APT). The high carbon content of bainitic ferrite compared to the para-equilibrium level of carbon in ferrite, absence of segregation of carbon to the austenite/bainitic ferrite interface and absence of partitioning of substitutional elements between the retained austenite and bainitic ferrite were also found using APT.

Application of advanced experimental techniques for the microstructural characterization of nanobainitic steels

A 0.79C-1.5Si-1.98Mn-0.98Cr-0.24Mo-1.06Al-1.58Co (wt%) steel was isothermally heat treated at 350°C bainitic transformation temperature for 1 day to form fully bainitic structure with nano-layers of bainitic ferrite and retained austenite, while a 0.26C-1.96Si-2Mn-0.31Mo (wt%) steel was subjected to a successive isothermal heat treatment at 700°C for 300 min followed by 350°C for 120 min to form a hybrid microstructure consisting of ductile ferrite and fine scale bainite. The dislocation density and morphology of bainitic ferrite, and retained austenite characteristics such as size, and volume fraction were studied using Transmission Electron Microscopy. It was found that bainitic ferrite has high dislocation density for both steels. The retained austenite characteristics and bainite morphology were affected by composition of steels. Atom Probe Tomography (APT) has the high spatial resolution required for accurate determination of the carbon content of the bainitic ferrite and retained austenite, the solute distribution between these phases and calculation of the local composition of fine clusters and particles that allows to provide detailed insight into the bainite transformation of the steels. The carbon content of bainitic ferrite in both steels was found to be higher compared to the para-equilibrium level of carbon in ferrite. APT also revealed the presence of fine C-rich clusters and Fe-C carbides in bainitic ferrite of both steels.

Effect of thermomechanical processing on the microstructure and retained austenite stability during in situ tensile testing using synchrotron X-Ray diffraction of NbMoAl TRIP steel

In this work we compare and contrast the stability of retained austenite during tensile testing of Nb-Mo-Al transformation-induced plasticity steel subjected to different thermomechanical processing schedules. The obtained microstructures were characterised using optical metallography, transmission electron microscopy and X-ray diffraction. The transformation of retained austenite to martensite under tensile loading was observed by in-situ high energy X-ray diffraction at 1ID / APS. It has been shown that the variations in the microstructure of the steel, such as volume fractions of present phases, their morphology and dimensions, play a critical role in the strain-induced transition of retained austenite to martensite.

Blind estimation of MIMO relay channels

In this paper, we integrate two blind source separation (BSS) methods to estimate the individual channel state information (CSI) for the source-relay and relay-destination links of three-node two-hop multiple-input multiple-output (MIMO) relay systems. In particular, we propose a first-order Z-domain precoding technique for the blind estimation of the relay-destination channel matrix, while an algorithm based on the constant modulus and mutual information properties is developed to estimate the source-relay channel matrix. Compared with training-based MIMO relay channel estimation approaches, our algorithm has a better bandwidth efficiency as no bandwidth is wasted for sending the training sequences. Numerical examples are shown to demonstrate the performance of the proposed algorithm. © 2014 IEEE.

Kinetics of γ-Mg17Al12 phase dissolution and its effect on room temperature tensile properties in as-cast AZ80 magnesium alloy

As-cast AZ80 magnesium alloy consists of α-Mg, eutectic product of α-Mg and γ-Mg17Al12, with the latter present in the form of partially and fully divorce eutectic. There occurs dissolution of harder γ-Mg17Al12 phase during homogenization treatment at 400 ° and 439 °C. The proportion of the α-Mg and γ-Mg17Al12 phase was varied by solutionizing the alloy for various lengths of time at these temperatures, in order to investigate the kinetics of phase transformation and to evaluate the effect of phase proportion, size and morphology on room temperature tensile properties. It was found that the yield strength decreases with the increase in solutionizing temperature from 400° to 439 °C and at the same time, ductility in general increases with the increasing solutionizing temperature. The variation in tensile properties and the nature of fractographs were analyzed in terms of the effects of microstructure. © (2014) Trans Tech Publications, Switzerland.